A few years ago I was given a large ash Cookie slab. It sat in my garage drying for a long time, waiting for time and inspiration to create something with it. As with many "Cookies" this one had a large gap in it that occurred during the drying process. I wanted to find a way to creatively cover the crack. After some conversation with my wife Shari, we eventually landed on the plan to engrave the image of "The Tree of Life" into the surface of the Cookie slab, and embrace the crack as part of the image of the tree. The slab was then attached to a beautiful, matching stump and made into a coffee table. The images show the journey of making this happen.
Flattening the Cookie Slab
Because the slab is quite large (29" wide), it was too large go through my planner. I therefore had to flatten the wood using my router, and a custom made "sled" for the job. The planner passes along surface, leveling the surface about one inch at a time with each pass of the planner. It is tedious, but it gets the job done.
.jpg%3F2025-12-21T12%253A52%253A04.663Z&w=3840&q=100)
Stabilizing the Slab
The next step was to stabilize the slab to prevent it from cracking any further. As you can see, the slab had a massive crack. On the underside of the slab, I routered the shape of bowties along the length of the crack, and then added precut shapes to fit in. I then used more wood pieces to fill in the rest of the crack.
Routering the Image
The next step was to draw and then router the image. I had never routered an image into wood before. I am thankful to my brother-in law who showed me the tools and techniques for this. Since doing this project, I have done many other routered images & designs. Check out the routering category for more examples.
In this case, I used a piece of iron art that we had as the basic guide for drawing the tree, and then adapted it fit the shape of the crack and the overall look of the piece.
.jpg%3F2025-12-21T12%253A51%253A36.503Z&w=2048&q=100)
.jpg%3F2025-12-21T12%253A51%253A23.378Z&w=2048&q=100)
Pouring the Epoxy and Finishing
The final steps where to filled the now routered image with epoxy, sand the surface, and protect the wood surface with several coats of varathane. I then mounted it on a beautiful matching stump, as show in the last picture.
-1.jpg%3F2025-12-22T15%253A57%253A13.253Z&w=2048&q=100)
-1.jpg%3F2025-12-22T15%253A58%253A35.169Z&w=1920&q=100)
%2520-%2520Copy.jpg%3F2025-12-23T00%253A42%253A46.575Z&w=3840&q=100)

.jpeg%3F2025-12-26T14%253A25%253A18.397Z&w=3840&q=100)