Live Edge: Coffee Tables

A few years ago I needed some small "coffee tables" to place in front of our windows to place our plants on. I wanted something that could withstand the abuse of water spills, something that fit the size and height I needed, and of course something nice enough for our living room. These tables that I made from Black Walnut, epoxy and steel hair pin legs have really fit the bill. We still use them today.

This was the first live edge / epoxy project I did. When we went looking for wood we ended up at a farm, and came home with this 14 foot board that had been siting outside a shed for years. It was a true diamond in the rough. The first picture shows the original board, and 2nd shows the beautiful deep brown that came through after I started sanding.

You will notice in the images above that there where cracks as well as a large gap that needed to be filled. I decided to fill it with clear epoxy so that you could see through it and admire the natural beauty of the piece.

This sequence shows the finishing of the tables. There is no stain on this, just odie's oil bringing out the natural colors of the Black Walnut wood. I used "hairpen" metal legs. These are fairly inexpensive and look great with live edge tables.

One table sanded, and ready for epoxy (to fill cracks), and finishing oil.

2nd table sanded, finished with Odies Oil and then polished.

Some succulents on their new table!


Why use Odie's Oil?

Odie's Oil is a great product for finishing hardwood furniture like this. The oil is easy to apply, easy to clean up, smells great and really helps bring out the natural grains and colors of the piece while also doing a great job of protecting the wood.

After rubbing the oil into the surface, you then wait a few minutes for it to set. You then remove the excess oil and buff the surface with a towel. That's it. While it is not the choice for every project it is one that I use a lot.

Related Posts