This painters box is the first project I did using routered box joints. For practice, I had decided to make something for myself. For many years, my craft paints where stored in a carboard box. I decided to make a box that could store and organize my paints.
This box was made from white ash. It needed to be made from fairly thin material, so I ripped the boards on the table saw to 1/4" thick, then glued the boards together for desired width of the box.
.jpeg%3F2025-12-26T19%253A34%253A42.071Z&w=3840&q=100)
.jpeg%3F2025-12-26T19%253A34%253A33.008Z&w=3840&q=100)
The table router was used to make box joints for the corners
.jpeg%3F2025-12-26T19%253A34%253A27.550Z&w=3840&q=100)
.jpeg%3F2025-12-26T19%253A34%253A19.787Z&w=3840&q=100)
Gluing & clamping the box cover
.jpeg%3F2025-12-26T19%253A34%253A36.857Z&w=3840&q=100)
Corner clamps used to help ensure the box is square
.jpeg%3F2025-12-26T19%253A33%253A45.327Z&w=3840&q=100)
.jpeg%3F2025-12-26T16%253A11%253A38.038Z&w=3840&q=100)
.jpeg%3F2025-12-27T20%253A53%253A34.604Z&w=3840&q=100)
The mountain scene was drawn & then routered into the surface of the cover
.jpeg%3F2025-12-27T20%253A52%253A52.097Z&w=3840&q=100)
The mountain scene was then painted with black and green paint to help the picture stand out
.jpeg%3F2025-12-26T19%253A33%253A29.526Z&w=3840&q=100)
.jpeg%3F2025-12-26T19%253A32%253A38.208Z&w=3840&q=100)
.jpeg%3F2025-12-26T19%253A33%253A35.380Z&w=3840&q=100)
Here is the box with my paints inside. There are 2 layers of small boxes inside, so I can organize my paints and supplies.
%2520(7)_optimized.jpeg%3F2025-12-26T03%253A43%253A58.653Z&w=3840&q=100)

.jpeg%3F2025-12-26T19%253A50%253A05.714Z&w=3840&q=100)
%2520(4)_optimized.jpeg%3F2026-01-03T15%253A41%253A27.686Z&w=3840&q=100)