Cutting Boards

I love the challenge of creating something from nothing, or in this case something from scraps.

I had some random hard wood scraps left over from other projects (black walnut, ash, as well pieces of an oak chair seat). I decided to use the scraps to make an extra large cutting board for our kitchen. Here is how I made the board.

First, I planned and sanded the repurposed pieces of the oak chair. I then cut the scraps of wood into strips, and alternated the dark and light pieces to make a pattern. Next, I glued, clamped, and sanded the assembled board flat once it dried.


The next step was the tricky part of the project. I wanted to create a routered juice groove around the end of the board.

  1. To do this I created a frame to guide the router as it went around the edge of the board. During the first attempt at this I recked the corners. To fix it, I had to cut the ends off of the board and glue new replacement new pieces.
  2. Once all was completed, I oiled both sides of the board with lots of food grade oil. It is now regularly used for larger kitchen tasks like slicing turkey or beef! The groove helps keep the juices from going all over the counter.


Below is another cutting board I made with some beautiful spalted maple. Believe it or not, those are all natural colors in the wood. Learn more about spalting in this post. The first picture below shows the board without the juice groove, the second shows the groove completed. You will notice it sat in a temporary frame around the cutting board. This was used to guide the hand router when making the groove. Unfortunately I didn't take a picture of the completed board!

Related Posts