Shop Cabinets: Drill Press

Designing Shop Cabinets

Over the past few years I have been building cabinets that will hold the larger tools in my workshop. The first, and most significant project in this series of cabinets was the one for my table saw & router. In designing them I keep the following in mind:

  1. Function / space - what are the most important functions I need it to have, and how can I design it in a way that takes up as little space as possible? I also like to build drawers in my cabinets. The drawers really help to keep everything in my shop organized.
  2. Portability - all needed to have high quality wheels so I can move things around easily or even take it outside when needed.
  3. Compatibility - as much as possible I try to ensure all the cabinets are the same height. This helps a lot when you need to use 2 cabinets together to hold a large project.
  4. Durability & cost - Cabinets in a workshop tend to get abused more than household furniture. They therefore need to be constructed really well, and where possible use quality materials. The best way to do this while keeping the price down is to repurpose materials. The top of this cabinet was made from hardwood slats that came from an old side table I found on the side of the road.

Step 1: Building the Drill Press Cabinet Frame

Despite what I said above about keeping cabinets the same height, this one needed to be shorter, in order for the drill press table to be at the optimal height. After determining the needed height and subtracting the height of the wheels, the first step was to build a box, that was open on the front (for the drawers):

Frame made from pine board

Frame assembly - using pocket holes

Cabinet box, glued, screwed and then clamped together

Step 2: Cabinet Drawers & Top

With the box built, the next step was to measure the interior height and then determine how many drawers to make and what height to make them. The boxes where built from left over pieces of pine, and the top was built from repurposed hardwood.

Matching drawer handles made using the scroll saw.

Drawer boxes glued and clamped

Plywood bottoms attached

Sliders installed on the drawers

Routering edges for the Drawer Fronts

Step 3: Hardwood Cabinet Top

The first picture shows old hardwood slats that I had repurposed from an old weather-beaten coffee table (rescued from the garbage). I put them through the planer and sanded / glued / clamped them together as a cabinet top. The hardwood boards where a little warped, so they needed to be clamped & weighed down while the glue dried.

Step 4: Drill Press Table

A drill press table provides a solid and stable surface for securing your workpiece.   This stability is important for achieving consistent and accurate drilling results.  You can purchase one, or build one as I did below. Mine is made repurposed hardwood vs store bought woods constructed from laminated covered particle board.

Related Posts